Aries324

The AR-324 is a multi-function module providing control voltage signal source and signal processors. The two low-frequency oscillators have independent manual frequency controls, provide three simultaneous waveform outputs each, and are syncable. The LAG circuit is a 6db-per-octave low-pass filter, with a variable, very low cut-off frequency. The LAG is used to limit the rate of change of a control signal, like the portamento circuit in the AR-313 Keyboard Control, or to "round off" the edges of a low frequency pulse to produce a useable envelope.

• LFO's:
• Frequency Range: 0,3Hz to 30KHz
• Output Waveforms:Sawtooth: 0v.-+10v.;
• Square: 0v.-+10v.;
• Triangle: -5v,-+5v.
• Sync Input: Positive-going edge. req., 2v. min, to 10v. max
• Sync Input Impedence: 47K ohms
• LAG:
• Gain: 1.0
• Lag Time variable, 1mS. to 1 sec.
• Input Impedence: 1K ohms at min. Lag; 1K ohms at max. Lag
• Input Level: +/-10v. max
• INVERTER:
• Gain: 1.0
• Input Level: +/-10v. max
• Input Impedence: 1K ohms, all outputs
• Control:

• LFO-1: Sync In, Sawtooth Out, Squar
• Out, Triangle Out
• LFO-2 same as LFO-1
• LAG In, LAG Out;
• INVERTER In,
• INVERTER Out.
• Power Consumption:

ARIES AR-324 DUAL LFO LAG/INVERTER MODULE
The AR-324 is a multi-function module providing control voltage signal source and signal processors. The two low-frequency oscillators have independent manual frequency controls, provide three simultaneous waveform outputs each, and are syncable. The LAG circuit is a 6db-per-octave low-pass filter, with a variable, very low cut-off frequency. The LAG is used to limit the rate of change of a control signal, like the portamento circuit in the AR-313 Keyboard Control, or to "round off" the edges of a low frequency pulse to produce a useable envelope. SPECIFICATIONS: • LFO's: • Frequency Range: 0,3Hz to 30KHz • Output Waveforms:Sawtooth: 0v.-+10v.; • Square: 0v.-+10v.; • Triangle: -5v,-+5v. • Sync Input: Positive-going edge. req., 2v. min, to 10v. max • Sync Input Impedence: 47K ohms • LAG: • Gain: 1.0 • Lag Time variable, 1mS. to 1 sec. • Input Impedence: 1K ohms at min. Lag; 1K ohms at max. Lag • Input Level: +/-10v. max • INVERTER: • Gain: 1.0 • Input Level: +/-10v. max • Input Impedence: 1K ohms, all outputs • Control: • LFO-1: Sync In, Sawtooth Out, Squar • Out, Triangle Out • LFO-2 same as LFO-1 • LAG In, LAG Out; • INVERTER In, • INVERTER Out. • Power Consumption: • 48mA at +15. D.C • 20mA at -15. D.C